

Sewer Cleaning Robot hose configuration is often misunderstood as a simple measurement. Our standard package includes a 50-meter hose bundle and a 50-meter control cable. While our documentation states that extended hose options are available, a longer hose is not simply a longer pipe. Extending beyond 50 meters introduces specific engineering boundaries: hydraulic pressure loss, reduced reeling speed, and heavier deployment loads. If you plan to clean a culvert or pipeline longer than 50 meters, you need to confirm these working limits. Simply send us your pipeline length and discharge elevation, and our engineers will calculate whether a standard setup is sufficient or an extended configuration is required.
TL;DR: 50 meters is the standard configuration for a reason. Extending the hose increases back pressure on the hydraulic system and slows down the reeling process. Thus, you cannot simply add hose without rechecking the pump head and winch load.
Why Sewer Cleaning Robot Hose Length Affects Hydraulic Pressure
| Model | YG-500 | YG-600 | YG-700 | YG-800 | YG-900 | YG-1200 |
| Robot dimensions | 1500*500*650mm | 1500*600*650mm | 1600*700*650mm | 1600*850*700mm | 1650*960*750mm | 1900*1200*750mm |
| Dredging width | 500mm | 600mm | 700mm | 800mm | 900mm | 1200mm |
| Track travel speed | 3-15m/s | 3-15m/s | 3-15m/s | 3-15m/s | 3-15m/s | 3-15m/s |
| Robot weight | 320kg | 350kg | 380kg | 400kg | 420kg | 500kg |
| Pump output diameter | 3inch | 3inch | 4inch | 4inch | 4inch | 4inch |
| Pump flow rate(cubic meters/ hour) | 100 m³ | 100m³ | 200m³ | 200m³ | 200m³ | 200m³ |
| Hydraulic station dimensions(mm) | 2200*1200*1700 | 2200*1200*1700 | 2200*1200*1700 | 2200*1200*1700 | 2200*1200*1700 | 2120*1240*1200 |
| Main motor power | 22kw | 22kw | 30kw | 30kw | 30kw | 45kw |
| Hydraulic system pressure | 0-16Mpa | |||||
| Particle size | 15mm | 15mm | 38mm | 38mm | 38mm | 60mm |
| Reeling system speed | 0-10r/min | |||||
| Hydraulic hoses | 50m (Standard configuration) | |||||
| Control system | Wireless remote control | |||||
| Lighting system | Underwater LED lights *2 | |||||
Hydraulic systems rely on consistent pressure to drive the robot’s tracks and the slurry pump. When you extend the hose bundle, friction inside the longer lines increases. As a result, the hydraulic station must work harder to push fluid to the robot. This creates two immediate technical challenges:
- Pressure Drop: The pressure available at the robot end decreases. This can reduce the power delivered to the tracks, especially in heavy sediment.
- Heat Generation: The pump station generates more heat to compensate for the pressure loss.
For a sludge dredging robot operating in deep water, this pressure drop is critical. Industry practice dictates that when hose length increases, engineers must either increase the hose diameter (to reduce friction) or verify that the pump station has enough reserve capacity. A standard machine quoted without checking your pipe length may struggle to maintain performance at the far end of the run.
If you need to handle deeper or more complex operating conditions (such as depths exceeding 50 meters), you may want to consider our deepwater dredging solutions.
How Winch Speed 0–10 r/min Of Sand Dredging Machine Limits Your Daily Work Cycle


The parameter table for our underwater dredging robot lists a winch speed of 0–10 r/min. This rotation speed converts to a linear deployment speed depending on the drum radius. Consequently, a longer hose does not just take up more physical space on the drum; it also increases the time required to deploy and retrieve the robot.
Consider a practical scenario:
- At 50 meters, a full deployment or retrieval cycle takes a predictable amount of time.
- At 100 meters, the winch must rotate for twice as long to spool the hose.
If you plan to use a sewer cleaning robot in a 100-meter culvert, the reeling time reduces the hours available for actual cleaning. Therefore, you must match the reeling speed to your daily work target. If your schedule is tight, you may need to confirm whether the winch motor can be upgraded or if a different deployment strategy is necessary.
What to Reconfirm Before Extending Beyond 50m
Before ordering an extended hose configuration for a water tank cleaning robot or a pipeline project, confirm the following three technical inputs with our engineering team. These items directly determine the final equipment configuration:
- Maximum Pipeline Distance: The total length from the entry point to the farthest cleaning point.
- Vertical Discharge Elevation: How high the slurry must be lifted (pump head).
- Sediment Density: Heavy sludge requires more tractive power, which is affected by hose length.
For sand dredging machine price inquiries, including these details allows our engineers to provide a targeted proposal. A generic quotation without these inputs is often incomplete. Please send us your pipeline layout, and we will review the hose reel capacity and pressure requirements for your specific site.
Customer FAQ About Sewer Cleaning Robot Hose Extensions


A: We do not recommend this. The hydraulic hoses and control cables are matched to the system pressure and communication protocols. Adding standard hoses can cause pressure loss and signal degradation. Please confirm the extension with our technical team so we can provide the correct rated components.
A: The 50m bundle is the standard balanced configuration. Beyond 50m, the back pressure increases, and the winch takes longer to reel. We confirm the exact working limit based on your pump head and winch speed requirements.
A: The standard winch operates at 0–10 r/min. For extended lengths, we evaluate whether this speed maintains an acceptable deployment cycle. Contact us with your project length so we can assess the reeling time.
A: Yes, we offer extended hose bundles. However, we must confirm the hydraulic station capacity and the reel capacity first.
A: Please include your maximum pipeline length, vertical lift height, and the type of sediment. For sand dredging machine price projects, this information helps us confirm the hose bundle and pressure settings.
Factory Support & CTA
Our factory provides configuration reviews for every extended hose project. If your pipeline exceeds 50 meters, simply send us your layout and discharge elevation. Our engineers will evaluate the pump head and winch speed, and respond with a technical recommendation within 1 business day.


